Patch dap 9.5.0.3

Ensure the surface is smooth, dry and free of any debris and jagged edges prior to applying the patch. Time to complete the entire repair will vary based on the environment temperature and humidity as well as the paint brand being used for the repair. Time to complete the repair takes approximately 30 minutes with prepping the surface, applying the patch and painting the first coat while the protective layer is still on.

Wait time is solely based on the time it takes for the paint to dry before applying another coat. Yes, the patch can be cut and customized to different shapes and sizes to fit certain applications such as corners, along trim and molding or for outlet applications. However, cutting the patches outer edges to fit a smaller size repair is not recommended as you will lose the feathered edge and gradient which will effect the overall appearance. We do not recommend using a heat gun to accelerate the paint dry time as heat guns get too hot and may damage the paint or the patch itself.

However, a hair dryer, on a cool, low setting at a safe distance from the wall could be used to accelerate the dry time of the paint without interfering with the completed repair. We do not recommend applying patches on top of one another to help cover a larger area of damage. For best results, use the recommended patch damage guidelines and choose the patch size that is sufficient for your repair. Yes, you can clean the repaired patched surface, however, we recommend waiting to clean the surface until after the paint has finished drying up to 4 weeks based on paint manufacturer recommendations.

We recommend waiting until the drywall surrounding the patch is fully dry approx. However, you can wait hours or even days to remove the protective layer if you are not going to apply the final two coats of paint immediately.

Based on paint manufacturer recommendations, paint may not be fully cure up to 4 weeks after application. Waiting the full 4 weeks, although may not be necessary, may be ideal prior to exposing to impact or cleaning to confirm the patch and paint adhesion is fully dry. User will also notice an increase in the invisibility and blending of the repair into the surrounding drywall as the paint completely dries.

The unique benefit of DAP Eclipse patches is that you do not need to use drywall mud or spackling to complete the repair. We do not recommend using joint compound or spackling over top of the patch as it may not provide acceptable finished results. However, DAP Eclipse is compatible with aerosol spray textures and textured rollers to complete a texture wall repair.

The Eclipse patches help you achieve an exponentially better repair than other products on the market. Once damage is caused, your walls will never be the same no matter what product your using to repair the damage.

The design of the patch does an excellent job of hiding the outline of the patch and providing a superior finished appearance. Until the first coat of paint is applied, dried and you remove the protective layer, the patch will be highly visible.

Once the protective layer is removed and your additional coats of paint are applied, you will notice a significant difference in the visibility of the patched area as it will blend in smoothly and evenly with the surrounding drywall making a highly invisible repair. Prepping the surface is a crucial step in the application process.

The surface should be as smooth, dry and free of any blemishes or debris as possible. We also recommend sanding the drywall surface prior to applying the patch to de-gloss the surface and increase adhesion. Sanding the patch down using sandpaper is not recommended and may not provide acceptable finished results.

We do recommend sanding the drywall prior to applying the patch to de-gloss the surface to promote and increase adhesion.

Yes, you can nail or screw back into the patch as long as there is drywall directly behind the patch where the nail or screw is placed. For best results, we recommend using DAP Eclipse on dry drywall. If you happen to have damp or wet drywall, we recommend completing a full drywall replacement to ensure no mold or mildew starts to grow.

DAP Eclipse is specifically designed to repair drywall damage. At this time, we only recommend using this product for drywall applications. Yes, you can apply spackling or drywall mud behind the patch prior to adhering the patch to provide additional support to your repair. You do not need to wait for the compound to dry prior to applying the patch, however, ensure the surrounding drywall is clean and free of material prior to applying the patch to ensure proper adhesion.

We recommend pulling the tab up and away from the drywall towards yourself in order to release the protective layer from the patch. We recommend always using a paint roller. Once the patch is adhered to the drywall surface, we do not recommend removing and repositioning.

This will significantly impact the patch adhesion to the drywall and may not provide acceptable, permanent, long-lasting results. To help position the patch properly on the first try, use the gray center circle of the patch as a guide to align over the center of the damage.

It is recommended to only use for interior drywall walls and ceilings. The product is compatible with aerosol spray textures and textured rollers.

If repairing textured walls or ceilings, remove the protective layer by pulling the pop-up tab immediately after adhering the patch to the drywall no need to apply the first coat of paint. Then apply texture, allow to dry thoroughly, then paint. Fast drying and specifically formulated to meet the demanding needs of Professional Painters, delivering outstanding paint finish results. High-performance sealant specifically formulated for use on molding and trim applications.

If you click the "Accept All Cookies" button or continue navigating the website, you agree to having those first and third-party cookies set on your device. If you do not wish to accept cookies from this website, you can choose to not allow cookies from this website by updating your browser preferences. For more information on how we use Cookies, please read our Privacy Policy. Our team of highly trained customer support staff is here to help with either product or project advice.

Key Features Superior Impact Resistance. Product Awards. Final Finished Appearance Patch may be noticeable and visible until it has completely dried. Paint Manufacturer Instructions Per paint manufacturer instructions it could take up to 4 weeks for paint to fully cure. To address these challenges, focusing on application acceleration, rather than network acceleration, is important with cloud-based application deployments. In the data center, IT can configure SPEEDbit Cloud Accelerator for applications that are about to move to the cloud and then provision another Speedbit Cloud Accelerator with the "user" of the application, be it a branch office, a different data center, an employee device or any type of user for which fast performance of the cloud app is required.

Deploying Speedbit Cloud Accelerator into the cloud along with along with the applications will enable a known set of performance standards and configurations, such as application availability SLAs, to be provisioned in the cloud and will bring some level of application control over the remote network back to the enterprise.

Read more. Video Preview. Pause and Resume. DAP Link Checker. Download Security. Mirror Sites Speed Boost. Videos Convert. More Speedbit Products. Speedbit Video Accelerator Watch YouTube videos without frustrating buffering pauses Works with over major video sites Premium version accelerates HD videos and iTunes downloads Available in 15 languages.

Share files on popular sites and blogs Keep files from bouncing back or filling up your mailbox. Speedbit, the creator of the most popular download manager - Download Accelerator Plus, is a pioneer in accelerating data delivery.