Wvc54gc manual usuario

To save a network, select Remember this network in the Connected to Your Network screen the last screen that appears when you connect to a network. To see a list of your saved networks, select Saved networks in the View drop-down menu of the Connect to a Wireless Network screen. To delete a saved network form the list, select the network and click Remove. In the Connect to a Wireless Network screen, select. Saved networks in the View drop-down menu.

The screen displays a list of your saved networks.. Select the network you want to connect to, and then click Connect. The Adapter connects to the network and the. Connected to Your Network screen appears. Your computer cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. Make sure that the computers are powered on.

Make sure that the Adapter is configured with the same Wireless Network Name SSID and wireless security settings as the other wireless computers in the Infrastructure configuration. WEB: If your questions are not addressed here, refer to the Linksys website, www.

Linksys warrants that this Linksys hardware product will be substantially free of defects in materials and workmanship arising under normal use during the Warranty Period, which begins on the date of purchase by the original enduser purchaser and lasts for the period specified below:.

This limited warranty is non-transferable and extends only to the original end-user purchaser. Any repaired or replacement products will be warranted for the remainder of the original Warranty Period or thirty 30 days, whichever is longer. This limited warranty shall apply in addition to any statutory or other rights which you may have under a contract of sale.

This limited warranty does not apply if: a the product assembly seal has been removed or damaged, b the product has been altered or modified, except by Linksys,. Without limiting the foregoing, Linksys does not warrant that the operation of the product or software will be uninterrupted or error free. Also, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the product, service, software or any equipment, system or.

The product may include or be bundled with third party software or service offerings. This limited warranty shall not apply to such third party software or service offerings. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction.

The foregoing limitations will apply even if any warranty or remedy provided under this limited warranty fails of its essential purpose.

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If you have a question about your product or experience a problem with it, please go to www. If the product proves defective during the Warranty Period, contact Linksys Technical Support for instructions on how to obtain warranty service.

The telephone number for Linksys Technical Support in your area can be found in the product User Guide and at www. Have your product serial number and proof of purchase on hand when calling.

You are responsible for properly packaging and shipping your product to Linksys at your cost and risk. You must include the RMA number. Products received without a RMA number and dated proof of original purchase will be rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge. Customers outside of the United States of America and Canada are responsible for all shipping and handling charges, custom duties, VAT and other associated taxes and charges.

This limited warranty is neither a service nor a support contract. This limited warranty is governed by the laws of the jurisdiction in which the Product was purchased by you. If any portion of this limited warranty is found to be void or unenforceable, its remaining provisions shall remain in full force and effect. For more information, please contact us www. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:.

Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users mustfollowthespecificoperatinginstructionsforsatisfying RF exposure compliance.

To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance has been established in typical laptop computer s with USB slot, and this product could be used in typical laptop computer s with USB slot.

Other applications like handheld PC or similar device have not been verified and may not be in compliance with related RF exposure rule and such use shall be prohibited. The firmware setting is not accessible by the end user. There may be a remote risk of electric shock from lightning. Operation is subject to the following two conditions:. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.

End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual.

Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. For all products, the Declaration of Conformity DofC is available through one or more of these options:. Visit www.

Then select your product. This feature is required by the regulations to avoid interference with Radio Location Services radars. As such, TPC is not required. Check the CE label on the product to find out which notified body was involved during the assessment. In the majority of the EU and other European countries, the 2,4- and 5-GHz bands have been made available for the use of wireless local area networks LANs.

Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. Linksys recommends that you check with the local authorities for the latest status of their national regulations for both the 2,4- and 5-GHz wireless LANs.

For 2,4 GHz, the product should not be used outdoors in the band - ,5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band when used indoors. The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. The regulatory limits for maximum output power are specified in EIRP. The EIRP level of a device can be calculated by adding the gain of the antenna used specified in dBi to the output power available at the connector specified in dBm.

This product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted. However, some applications may require the antenna s , if removable, to be separated from the product and installed remotely from the device by using extension cables.

Both of these cables are 9 meters long and have a cable loss attenuation of 5 dB. Combinations of extension cables and antennas resulting in a radiated power level exceeding mW EIRP are illegal. Select the country or region in which you live. Click the Products tab. Select the appropriate product category. Select the product sub-category, if necessary. Select the type of documentation you want from the More Information section. NOTE: If you have questions regarding the compliance of this product or you cannot find the information you need, please contact your local sales office or visit www.

This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder.

Eesti Estonian - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici.

Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging vandezeenandereelektrischeenelektronischeapparatuurviade daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft.

Este responsabilitatea dvs. WEB: For additional information, please visit www. Any software originating from Linksys and its suppliers is licensed under the Linksys Software License Agreement contained at Schedule 1 below. You may also be prompted to review and accept that Linksys Software License Agreement upon installation of the software. Any software from the open source community is licensed under the specific license terms applicable to that software made available by Linksys at www.

Where such specific license terms entitle you to the source code of such software, that source code is upon request available at cost from Linksys for at least three years from the purchase date of this product and may also be available for download from www.

For detailed license terms and additional information on open source software in Linksys products please look at the Linksys public web site at: www. The software Licenses applicable to software from Linksys are made available at the Linksys public web site at: www.

For your convenience of reference, a copy of the Linksys Software License Agreement and the main open source code licenses used by Linksys in its products are contained in the Schedules below. This license may not be sublicensed, and is not transferable except to a person or entity to which you transfer ownership of the complete Linksys product containing the Software, provided you permanently transfer all rights under this Agreement and do not retain any full or partial copies of the Software, and the recipient agrees to the terms of this Agreement.

Protection of Information. You will not copy or modify the Software or decompile, decrypt, reverse engineer or disassemble the Software except to the extent expressly permitted by law notwithstanding this provision , and You will not disclose or make available such trade secrets or copyrighted material in any form to any third party.

Title to and ownership of the Software and documentation and any portion thereof, will remain solely with Linksys or its suppliers. Collection and Processing of Information. Software Upgrades etc. If the Software enables you to receive Upgrades, you may elect at any time to receive these Upgrades either automatically or manually. You will always be notified of any Upgrades being delivered to you.

The terms of this license will apply to any such Upgrade unless the Upgrade in question is accompanied by a separate license, in which event the terms of that license will apply.

Open Source Software. Neste roteador sem fio tenho a camera IP contectada. Tenho que configurar meu DDNS no-ip no modem ou roteador?

E se eu configurar nos 2 juntos? Eu estou compartilhando a internet velox com meu vizinho, sai um cabo da casa dele de um modem zte e entra num multilaser n. Agora arrumei uma camera ip. Consigo acesso ao zte No mais muito obrigado.. Crie uma nova conta em nossa comunidade. Leia mais. Camera IP. Seguidores 0.

Tal y como se aprecia en la Figura 2, hay una primera boca de izquierda a derecha , etiquetada como 'Internet' en el router, que internamente recibe el nombre de eth0. Internamente recibe el nombre de wlan0. Existen 2 maneras complementarias de acceder al router:. Por lo tanto, todos los cambios que realice se pierden si resetea, o apaga y enciende el router. Una vez configurado el PC adecuadamente, conectado el cableado necesario, y encendido el router el router necesita algunos segundos para arrancar, tiempo durante el cual no se puede acceder al mismo , podemos realizar un telnet desde el PC:.

Desde esta consola inicial podemos realizar diferentes acciones en el router. Como se puede apreciar, existen multitud de posibles comandos accesibles desde este modo. De todos los comandos listados anteriormente, es interesante describir los siguientes 3 :. Este comando es el primer paso para configurar. Esta lista muestra los comandos completos, incluyendo las posibles modificadores.

El valor 0xffffffff representa infinito. Router Advertisement multicast no solicitados. No puede ser inferior a 3 segundos. El valor por defecto es Featuring immersive 7.

Its white finish is…. Its Xtra Bass sound system…. The keyboard offers an exceptional responsiveness and…. This new version of the very…. This Combo offers a powerful backlit keyboard…. With its reactive membrane, its 6 anti-ghosting keys and its metal plate….